Automatic Fire Extinguisher for Enclosed Spaces

Automatic Fire Extinguisher for Enclosed Spaces

This automatic fire suppressor is designed to protect the enclosed spaces you cannot watch, day or night. It sticks inside a space such as a breaker box, battery box or RV compartment. If the temperature inside reaches about 338°F, it activates on its own within seconds and fills the space with a fine fire-suppressing aerosol, designed to knock a fire down before it spreads. It needs no batteries, no wiring and no one to press a button, so it works whether you are home, asleep or away.

Key features

• Automatic activation: it activates on its own when heat inside the space reaches about 338°F, and needs no power.
• Two heat-sensing cords: two built-in cords react to heat from either side.
• Peel-and-stick installation: no tools, no wiring and no batteries.
• Rail clip: it snaps onto standard 35mm rails in panels that have them.
• Nothing to maintain: there is nothing to charge, switch on or maintain.

Coverage

Use one unit for each enclosed space. It covers one enclosed space up to 3.5 cubic feet. Most homes need one unit for the breaker box, plus one for each battery box, RV compartment or cabinet you want covered. If a space is larger than 3.5 cubic feet, use two units.

It is intended for breaker boxes, battery boxes, RV compartments and other closed spaces.

How to install

1. Peel: peel the backing off the adhesive pad on the back of the unit.
2. Stick: wipe a clean, dry surface inside the breaker box, battery box or RV compartment. Press the unit firmly onto it for a few seconds.
3. Close: close the door or lid. The unit now watches over the space around the clock.

The unit can also be snapped onto a standard 35mm rail in panels that have one.

For breaker boxes, switch off the main breaker before opening the panel. If you would rather not work near wiring, any electrician can install it in about a minute.

What's included

• 1 FlameOff unit, which activates on its own at about 338°F and covers one enclosed space up to 3.5 cubic feet
• 2 heat-sensing cords, built in
• 1 adhesive mounting pad
• 1 built-in rail clip
• 1 quick-start card, with simple picture steps and a space to write your install date

Important limitations

This unit is a backup for enclosed spaces. It does not replace working smoke alarms, a handheld fire extinguisher, or calling 911.