Permanent adhesive discs stay attached to the roof, while the dish can be removed whenever needed.
This adhesive mounting kit combines VHB-backed magnetic discs with a rubber-coated magnet set. The discs provide a magnetic attachment point on roof materials that magnets cannot hold by themselves. Place the mount over the discs for a firm connection, then lift it away within seconds. It is made for RV owners, van builders, and travelers who need a drill-free installation that remains secure at highway speed while allowing the roof to be reclaimed when required.
Industrial-grade injection molding gives the compact mount a height of only 1.8” and provides protection around the dish on every side. The design works with either the dish’s kickstand or pole mount, allowing flexible setup options.
The system uses industrial-strength VHB adhesive to secure the mounting discs to the roof. Because the adhesive creates a permanent bond, carefully mark the location and verify it before installation. Once attached, the discs create a magnetic landing area. Rubber-coated magnets rest on that area and have been safety tested to 120 mph. The magnets are removable: take the dish down for storage, maintenance, clearance beneath a low garage, or winter storage, then reinstall it in seconds without tools or replacement adhesive.
Magnets may be placed directly on bare or painted steel, so the discs are not needed in those cases. For fiberglass, aluminum, rubber roofing, gel coat, and composite surfaces, use the discs because those materials do not provide a magnetic grip. Glass requires heavy-duty suction cups.
Key Features:
- Safety tested up to 120 mph
- Drill-free installation
- Protection against snowmelt
- Optimized heat transfer
- Signal performance prioritized
What’s Inside the Kit
Compact Low-Profile Mount
A durable, streamlined mounting solution with an ultra-low profile for the dish.
Constructed entirely through injection molding for maximum durability
Measures only 1.8” in height after installation
Encloses and protects the dish on every side
Compatible with the dish’s kickstand and pole mount
Simple two-piece construction using stainless steel bolts and nylon locknuts
Available in White or Black
VHB Adhesive-Backed Magnet Mounting Discs
These discs create a magnetic attachment location on roofs that are not magnetic.
Weather-resistant steel discs use industrial-strength VHB adhesive on the underside
Adheres to fiberglass, aluminum, rubber roofing, painted steel, and gel coat
Forms a permanent bond after curing, so check the position before applying pressure
Designed to remain secure through vibration, weather, and highway speeds
Low-profile construction becomes nearly invisible when the mount is removed
Rubber-Coated Magnet Set
Strong holding power combines with a finish-friendly rubber grip.
Provides substantial holding force for highway travel when positioned correctly
Fits over the mounting discs or attaches directly to a bare or painted steel roof
Rubber coating helps safeguard the vehicle’s finish
Installs and removes within seconds without tools
Well suited to vans, trucks, SUVs, and off-road builds
Compact 12V DC Power Cable
This cable supplies power to the dish directly from a vehicle.
10 ft cable fitted with a standard 12V cigarette lighter plug
Uses less energy than operating an inverter
Plug-and-play design suited to overlanding, extended travel days, and remote work
4.5 mm Polycarbonate Cover
A rigid top-side shield helps protect the dish.
Made from 4.5 mm polycarbonate (Lexan)
Defends the dish against road debris, branches, and weather
Can be installed or removed in seconds
Preserves the mount’s low-profile appearance
Consult the complete installation guide for a detailed step-by-step walkthrough.