{"product_id":"mini-adhesive-magnetic-mounting-kit-with-vhb-discs-and-rubber-coated-magnets","title":"Mini Adhesive Magnetic Mounting Kit with VHB Discs and Rubber-Coated Magnets","description":"\u003cdiv\u003e\u003carticle\u003e\n\u003cp\u003ePermanent adhesive discs stay attached to the roof, while the dish can be removed whenever needed.\u003c\/p\u003e\n\u003cp\u003eThis adhesive mounting kit combines VHB-backed magnetic discs with a rubber-coated magnet set. The discs provide a magnetic attachment point on roof materials that magnets cannot hold by themselves. Place the mount over the discs for a firm connection, then lift it away within seconds. It is made for RV owners, van builders, and travelers who need a drill-free installation that remains secure at highway speed while allowing the roof to be reclaimed when required.\u003c\/p\u003e\n\u003cp\u003eIndustrial-grade injection molding gives the compact mount a height of only 1.8” and provides protection around the dish on every side. The design works with either the dish’s kickstand or pole mount, allowing flexible setup options.\u003c\/p\u003e\n\u003cp\u003eThe system uses industrial-strength VHB adhesive to secure the mounting discs to the roof. Because the adhesive creates a permanent bond, carefully mark the location and verify it before installation. Once attached, the discs create a magnetic landing area. Rubber-coated magnets rest on that area and have been safety tested to 120 mph. The magnets are removable: take the dish down for storage, maintenance, clearance beneath a low garage, or winter storage, then reinstall it in seconds without tools or replacement adhesive.\u003c\/p\u003e\n\u003cp\u003eMagnets may be placed directly on bare or painted steel, so the discs are not needed in those cases. For fiberglass, aluminum, rubber roofing, gel coat, and composite surfaces, use the discs because those materials do not provide a magnetic grip. Glass requires heavy-duty suction cups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSafety tested up to 120 mph\u003c\/li\u003e\n\u003cli\u003eDrill-free installation\u003c\/li\u003e\n\u003cli\u003eProtection against snowmelt\u003c\/li\u003e\n\u003cli\u003eOptimized heat transfer\u003c\/li\u003e\n\u003cli\u003eSignal performance prioritized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat’s Inside the Kit\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Low-Profile Mount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA durable, streamlined mounting solution with an ultra-low profile for the dish.\u003c\/p\u003e\n\u003cp\u003eConstructed entirely through injection molding for maximum durability\u003cbr\u003eMeasures only 1.8” in height after installation\u003cbr\u003eEncloses and protects the dish on every side\u003cbr\u003eCompatible with the dish’s kickstand and pole mount\u003cbr\u003eSimple two-piece construction using stainless steel bolts and nylon locknuts\u003cbr\u003eAvailable in White or Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVHB Adhesive-Backed Magnet Mounting Discs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese discs create a magnetic attachment location on roofs that are not magnetic.\u003c\/p\u003e\n\u003cp\u003eWeather-resistant steel discs use industrial-strength VHB adhesive on the underside\u003cbr\u003eAdheres to fiberglass, aluminum, rubber roofing, painted steel, and gel coat\u003cbr\u003eForms a permanent bond after curing, so check the position before applying pressure\u003cbr\u003eDesigned to remain secure through vibration, weather, and highway speeds\u003cbr\u003eLow-profile construction becomes nearly invisible when the mount is removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRubber-Coated Magnet Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStrong holding power combines with a finish-friendly rubber grip.\u003c\/p\u003e\n\u003cp\u003eProvides substantial holding force for highway travel when positioned correctly\u003cbr\u003eFits over the mounting discs or attaches directly to a bare or painted steel roof\u003cbr\u003eRubber coating helps safeguard the vehicle’s finish\u003cbr\u003eInstalls and removes within seconds without tools\u003cbr\u003eWell suited to vans, trucks, SUVs, and off-road builds\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact 12V DC Power Cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable supplies power to the dish directly from a vehicle.\u003c\/p\u003e\n\u003cp\u003e10 ft cable fitted with a standard 12V cigarette lighter plug\u003cbr\u003eUses less energy than operating an inverter\u003cbr\u003ePlug-and-play design suited to overlanding, extended travel days, and remote work\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.5 mm Polycarbonate Cover\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA rigid top-side shield helps protect the dish.\u003c\/p\u003e\n\u003cp\u003eMade from 4.5 mm polycarbonate (Lexan)\u003cbr\u003eDefends the dish against road debris, branches, and weather\u003cbr\u003eCan be installed or removed in seconds\u003cbr\u003ePreserves the mount’s low-profile appearance\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eConsult the complete installation guide for a detailed step-by-step walkthrough.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/article\u003e\u003c\/div\u003e","brand":"{-boxzora}}","offers":[{"title":"White","offer_id":62743024533874,"sku":"CLLBRMQN1V","price":290.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":62743024566642,"sku":"CLJD3OSJAU","price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2183\/4610\/files\/Essential_Adhesive_Kit_Mini_Speedmount_1.png?v=1793917924","url":"https:\/\/boxzora.com\/products\/mini-adhesive-magnetic-mounting-kit-with-vhb-discs-and-rubber-coated-magnets","provider":"boxzora","version":"1.0","type":"link"}